Want Free Shipping?

Subscribe to our mailing list and get free shipping
on orders of $200 or more!
No thanks, I'm already subscribed
Free shipping limited to retail orders of $200 or more
in the 48 contiguous states.

Installation and How To Videos

Installation of the HP Action Kit and HP Action Kit Plus

Installing our HP Action Kit and HP Action Kit Plus into your factory 10/22™ trigger guard.

Shim Adjustment for VF Target Frames

A look at the shim in the VF Target Frame and how it affects the fitment of the upper receiver.

Installation of the Posi-Lock Bolt Latch For MKII & MKIII

Is your Ruger MKII or MKIII pistol's bolt not locking back after the last round? Check out our Posi-Lock Bolt Latch.

Replacing the Firing Pin and Extractor on the Summit Bolt

Replacing the Firing Pin and Extractor on the Summit rifle bolt.

Adjusting The Pretravel & Overtravel On The TG2000 Trigger Group

How to adjust the pretravel and overtravel on your TG2000 Trigger Group.

Installation of the TG2000 Rapid Release

Our TG2000 Rapid Release allows you to change magazines quickly while maintaining your grip on your rifle.

Installation of Exact Edge Extractor & Holder for the CZ 457

Installation of Exact Edge Extractor & Holder for the CZ 457

Installation of Laminated Grips for the S&W SW22 Victory

Installation of the Laminated Grips for the S&W SW22 Victory

Installation of Volthane Grip for the Ruger® MK III

Installation of the Volthane Grip for the Ruger® MK III

Installation of Laminated Grips for the Ruger® MK III

Installation of the Laminated Grips for the Ruger® MK III

Installation of a 10/22® Stock

This process is applicable to our Laminated Wood stocks as well as additional aftermarket stocks that we offer.

Installation of Laminated Grips for the Ruger® MK IV™ 22/45™

Installation of our Laminated Grips for the Ruger® MK IV™ 22/45™

Installation of the Accurizing Kit for the Ruger® MKII or MKIII

Installation of the Volquartsen Accurizing Kit for the Ruger® MKII or MKIII.

Tuning Your Rotary Magazines

Kolby Pavlock breaks down the process to tune your rotary magazines.

Disassembly of the Scorpion 22 LR Pistol

The disassembly and reassembly process for our Scorpion 22 LR pistol.

Installing An Optic On The Universal Red Dot Mount

The Volquartsen Universal Red Dot Mount provides drilled and tapped mounting points for the most popular optics on the market.

Bolt Function and Headspacing on the Summit Rifle

When building a custom Summit how do you know if the closing of the bolt is too tight or too loose and do you need to adjust the headspacing?!

Disassembly of Our Semi-Auto Rifles

The process for disassembling and reassembling our semi-auto rifles.

Disassembly of the ENV Pistol

The disassembly/reassembly process for our ENV Pistol. This process is the same whether you have the ENV-6 or ENV-9 model.

Installation of Laminated Grips for the Ruger® MK IV™

Installation of our Laminated Grips for the Ruger® MK IV™. Please note that these grips are not compatible with the 22/45™ models.

Installation of the Volthane Grip for the Ruger® MK IV™

Follow these easy steps to install our Volthane Grip on your Ruger® MK IV™. Please note that this grip is not compatible with the 22/45™ models.

Installation of the Bolt Stop Pin and V-Lock Retainer Spring

How to install the Volquartsen Boltstop Pin and V-Lock Retainer Spring for the Ruger® MK IV™.

Removing A 10/22® Barrel From The Receiver

The process of removing a 10/22® barrel from the receiver.

Removal of the Extractor and Firing Pin from our 10/22® Competition Bolt

Learn how to remove and replace the Extractor and Firing Pin in our 10/22® Competition Bolt.

Installation of the Striplin Thumbrest on the Black Mamba

Often referred to as the "gas pedal", a thumbrest is a great addition to your Black Mamba or Ruger® MK IV™ pistol.

Fixing a Loose Ruger® MK IV™ Main Spring Tube

If a customer is experiencing a gritty feel, grinding sounds and/or light strikes - the mainspring tube is the first thing to check.

Installation of the Competition Bolt for the Ruger® 10/22®

Installation of the Volquartsen Competition Bolt for the Ruger® 10/22®.

Adjustment and Removal of the Target Rear Sight

Addressing some of the most common asked questions regarding adjustment of our Target Rear Sight.

Installation of the Target Hammer for the Ruger® PC Carbine™/PC Charger™

Installing the Target Hammer in your Ruger® PC Carbine™ or PC Charger™

Installation of a Volquartsen Aftermarket Barrel Into a 10/22® Receiver

The installation process and the tools required to install one of our aftermarket barrels into your 10/22® receiver.

Please wait while we process your request